VTC Body Creation: Difference between revisions
No edit summary |
(Changed instructions to represent the new programs and steps in the VTC CNC process) |
||
Line 5: | Line 5: | ||
= Programs = | = Programs = | ||
# O0761: | # O0751: face 2.75 | ||
# O0762: | # O0752: face 2.0 | ||
# O0763: | # O0753: face 2.5 | ||
# O0764: | # O0761: top | ||
# O0765: | # O0762: port holes | ||
# O0766: vent | # O0754: body face tops | ||
# O0763: upper cavity | |||
# O0764: lower cavity | |||
# O0765: upper junction | |||
# O0766: air passage | |||
# O0767: vent | |||
= Tooling = | = Tooling = | ||
Line 24: | Line 29: | ||
= Stock = | = Stock = | ||
# Top, cover: 2 x 2 x | # Top, cover: 2.25 x 2.25 x 3 | ||
# Bottom: 2 x 2 x | # Bottom: 2.25 x 2.25 x 2.25 | ||
= Finished dimensions = | = Finished dimensions = | ||
Line 34: | Line 39: | ||
= Instructions = | = Instructions = | ||
# Reference face: | # Reference face: right | ||
# Run ' | # Run 'face 2.75' on top and bottom faces of 3.0" blank (upper blank) | ||
# Run 'face 2.0' on all remaining faces of upper blank | |||
# Run "face 2.0' on all faces of 2.25" blank (lower blank) | |||
# Run 'face 2.5' on top and bottom faces of upper blank | |||
# Run 'top' on top face of upper blank | |||
# Separate cover from top using bandsaw | # Separate cover from top using bandsaw | ||
## Part cover at 0.5" | ## Part cover at 0.5" | ||
## | # Run "port holes' on front face of lower blank | ||
# Run ' | # Run "body face tops" on top face of upper and lower blanks. | ||
# Run ' | # Run 'body upper cavity' on top face of upper blank | ||
# Run ' | # Run 'body lower cavity' on top face of lower blank | ||
# Run ' | # Run 'body upper junction' on bottom face of upper blank | ||
# Assemble | # Run 'air passage' on top face of upper blank | ||
# Run 'vent' on top face of | # Assemble upper and lower blanks to form the VTC body | ||
# Run 'vent' on top face of VTC body |
Latest revision as of 13:36, 15 July 2024
Work offsets
- O0014: fence
Programs
- O0751: face 2.75
- O0752: face 2.0
- O0753: face 2.5
- O0761: top
- O0762: port holes
- O0754: body face tops
- O0763: upper cavity
- O0764: lower cavity
- O0765: upper junction
- O0766: air passage
- O0767: vent
Tooling
- T0002: 15/64 end mill, 4-flute
- T0009: 1/8 drill
- T0011: 5/64 end mill, 3-flute
- T0013: 1/4 end mill, 2-flute
- T0017: 3/8 end mill, 2-flute
- T0018: 1/2 end mill, 2-flute
- T0021: 1 end mill, 2-flute
- T0022: 3/4 end mill, 2-flute
- T0024: 3/16 end mill, 3-flute
Stock
- Top, cover: 2.25 x 2.25 x 3
- Bottom: 2.25 x 2.25 x 2.25
Finished dimensions
- Cover: 2 x 2 x 0.5, w/ 0.375 hole
- Body: 2 x 2 x 3.55
- Top: 2 x 2 x 1.9
- Bottom: 2 x 2 x 1.9
Instructions
- Reference face: right
- Run 'face 2.75' on top and bottom faces of 3.0" blank (upper blank)
- Run 'face 2.0' on all remaining faces of upper blank
- Run "face 2.0' on all faces of 2.25" blank (lower blank)
- Run 'face 2.5' on top and bottom faces of upper blank
- Run 'top' on top face of upper blank
- Separate cover from top using bandsaw
- Part cover at 0.5"
- Run "port holes' on front face of lower blank
- Run "body face tops" on top face of upper and lower blanks.
- Run 'body upper cavity' on top face of upper blank
- Run 'body lower cavity' on top face of lower blank
- Run 'body upper junction' on bottom face of upper blank
- Run 'air passage' on top face of upper blank
- Assemble upper and lower blanks to form the VTC body
- Run 'vent' on top face of VTC body