Port Pressure Sensor 100 PSI No Spacer Creation

    3D Model    About this item    Product info

---

1. Add the Viton tubing 189 x 125 x 312 to port pressure sensor.

   

   3D Model of a pressure sensor with Viton tubing.

2. Use the seal mandrel for AP-PPS30 (TL-PPSSM) and seal pusher for AP-PPS30 (TL-PPSSP) to push the Viton tubing onto the pressure sensor.
3. Use tweezers to twist the tubing down and to stretch it to make sure it covers the pressure sensor.