Plug Valve 1/4 + Actuator Creation: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

3 May 2024

  • curprev 15:0215:02, 3 May 2024‎ 73.24.216.92 talk‎ 1,734 bytes +57‎ No edit summary undo
  • curprev 14:5814:58, 3 May 2024‎ 73.24.216.92 talk‎ 1,677 bytes +18‎ No edit summary undo
  • curprev 14:5714:57, 3 May 2024‎ 73.24.216.92 talk‎ 1,659 bytes +1,659‎ Created page with " =Insert the valve stem into the coupling= #Choose the plug's orientation in the coupling according to the valve's intended location in the plumbing Notes: #The actuator is pre-programmed to the closed position. #Usually, the servo connector pins should point downstream, and the plug's port-sealing O-ring should face upstream. #Thus, the port O-ring usually faces away from the servo pins. Exceptions occur when the downstream chamber volume must be minimized. #Align the h..."
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Plug_Valve_1/4_%2B_Actuator_Creation"