LN Tubing Retainer 9 Port Creation

From Aeon HACS Wiki
    3D Model    About this item    Product info
  1. Use the paper cutter to cut a piece of PETG that is 2.5 inch by 9.5 inch.
  2. Use the tubing retainer fixture to hold the retainer in the MV35.
  3. Follow the LN tubing retainer program to put holes in the retainer.
Retrieved from "https://aeonhacs.com/wiki/index.php?title=LN_Tubing_Retainer_9_Port_Creation&oldid=679"