4BSV + Actuator Creation

From Aeon HACS Wiki
    3D Model    About this item    Product info
  1. Gather items listed in item data base BOM (excluding cable).
  2. Assemble 4BSV stem tip into coupling, as seen in the Onshape model.
  3. Tighten threaded insert 6-32 onto stem tip.
A servo serial screwed and mounted on top of an actuator frame 6pv above an 4BSV stem tip with lines motioning the 4BSV stem tip to be inserted into the bottom of the actuator.
Actuator being assembled onto the 4BSV stem tip.
4BSV + actuator fully assembled.
4BSV + actuator fully assembled.
Retrieved from "https://aeonhacs.com/wiki/index.php?title=4BSV_%2B_Actuator_Creation&oldid=466"