Jump to content

TC Staple Creation

From Aeon HACS Wiki
Revision as of 14:21, 23 April 2024 by 73.24.216.92 (talk) (Created page with "# Cut SS304 wire 0.025 spring back to 1.625 inches. # Grab the center of the cut wire with pliers. # Bend the wire down on both sides of the pliers. #* If the wire was centered correctly then both legs of the wire will be the same length. #* Check model to make sure that the part is made to the correct size.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Cut SS304 wire 0.025 spring back to 1.625 inches.
  2. Grab the center of the cut wire with pliers.
  3. Bend the wire down on both sides of the pliers.
    • If the wire was centered correctly then both legs of the wire will be the same length.
    • Check model to make sure that the part is made to the correct size.