Actuator Coupling 4MFV Creation

    3D Model    About this item    Product info

---

Instructions

Actuator coupling 4MFV exploded

1. Cut Acetal Black Rod 1 on table saw to 1.7 inch.
2. This part is milled on the MV35, follow the instructions within the program.
3. Use the coupling drill fixture 1.00 in the mill to make a cross hole.

   0.285 inch from the top face create a 0.159 inch hole that goes all the way to the center of the previous hole.

4. Use a 10-32 tap to thread the hole.
5. Insert screw 10-32 x 0.25 SS SS.