VTC Body Creation

3D Model    About this item

---

Work offsets

1. O0014: fence

Programs

1. O0761: cover
2. O0762: top cavity
3. O0763: junction
4. O0764: bottom cavity
5. O0765: port holes
6. O0766: vent

Tooling

1. T0002: 15/64 end mill, 4-flute
2. T0009: 1/8 drill
3. T0011: 5/64 end mill, 3-flute
4. T0013: 1/4 end mill, 2-flute
5. T0017: 3/8 end mill, 2-flute
6. T0018: 1/2 end mill, 2-flute
7. T0021: 1 end mill, 2-flute
8. T0022: 3/4 end mill, 2-flute
9. T0024: 3/16 end mill, 3-flute

Stock

1. Top, cover: 2 x 2 x 2.5
2. Bottom: 2 x 2 x 1.9

Finished dimensions

1. Cover: 2 x 2 x 0.5, w/ 0.375 hole
2. Body: 2 x 2 x 3.55
3. Top: 2 x 2 x 1.9
4. Bottom: 2 x 2 x 1.9

Instructions

1. Reference face: left
2. Run 'cover' on top face of 2.5" tall blank
3. Separate cover from top using bandsaw
   1. Part cover at 0.5"
   2. Size top to 1.9"
4. Run 'top cavity' on top face of 'top'
5. Run 'junction' on bottom face of 'top'
6. Run 'bottom cavity' on top face of 'bottom'
7. Run 'port holes' on front face of 'bottom'
8. Assemble 'top' and 'bottom' to form 'body'
9. Run 'vent' on top face of 'body'