VTC Body Creation
Work offsets
- O0014: fence
Programs
- O0761: cover
- O0762: top cavity
- O0763: junction
- O0764: bottom cavity
- O0765: port holes
- O0766: vent
Tooling
- T0002: 15/64 end mill, 4-flute
- T0009: 1/8 drill
- T0011: 5/64 end mill, 3-flute
- T0013: 1/4 end mill, 2-flute
- T0017: 3/8 end mill, 2-flute
- T0018: 1/2 end mill, 2-flute
- T0021: 1 end mill, 2-flute
- T0022: 3/4 end mill, 2-flute
- T0024: 3/16 end mill, 3-flute
Stock
- Top, cover: 2 x 2 x 2.5
- Bottom: 2 x 2 x 1.9
Finished dimensions
- Cover: 2 x 2 x 0.5, w/ 0.375 hole
- Body: 2 x 2 x 3.55
- Top: 2 x 2 x 1.9
- Bottom: 2 x 2 x 1.9
Instructions
- Reference face: left
- Run 'cover' on top face of 2.5" tall blank
- Separate cover from top using bandsaw
- Part cover at 0.5"
- Size top to 1.9"
- Run 'top cavity' on top face of 'top'
- Run 'junction' on bottom face of 'top'
- Run 'bottom cavity' on top face of 'bottom'
- Run 'port holes' on front face of 'bottom'
- Assemble 'top' and 'bottom' to form 'body'
- Run 'vent' on top face of 'body'