Actuator Frame Bearing 4LFV Creation: Difference between revisions
No edit summary |
No edit summary |
||
Line 9: | Line 9: | ||
# Drill a 0.443 inch hole on the top of the bearing. | # Drill a 0.443 inch hole on the top of the bearing. | ||
# Drill a 0.785 inch hole on the top (Do not go all the way through). | # Drill a 0.785 inch hole on the top (Do not go all the way through). | ||
=== Notes: === | |||
* Follow the model to find the correct position. |
Revision as of 13:09, 25 July 2024
Instructions
- This part is milled in the MV35, follow the instructions within the program.
- Drill a 0.443 inch hole on the top of the bearing.
- Drill a 0.785 inch hole on the top (Do not go all the way through).
Notes:
- Follow the model to find the correct position.