Actuator Frame Bearing 4LFV Creation

From Aeon HACS Wiki
    3D Model    About this item    Product info
  1. Setup the MV35 so that it will hold the actuator frame bearing.
  2. Grab an actuator bearing blank and place it into the setup.
  3. Run the program.
    • It is most efficient to do the same step on multiple blanks then move onto a different step.
  4. Run all of the programs required to turn the blank into the needed part
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Actuator_Frame_Bearing_4LFV_Creation&oldid=613"