Revision as of 15:50, 28 May 2024

Work offsets

@@ Line 1: / Line 1: @@
 <div style="text-align: right;">[https://cad.onshape.com/documents/7a1df5107f8020bbee77aa1d/v/f19fcc5442ea2a68ac80dd5a/e/4f5ddd09bc738079f977bed3?renderMode=0&uiState=65b6e514cf6cad7455a039a4 3D Model]&nbsp;&nbsp;&nbsp;&nbsp;[https://www.aeonlaboratories.com/?page=products&item=VTC+body About this item]</div>
 ----
-[Summary Paragraph]
+= Work offsets =
+# O0014: fence
+= Programs =
+# O0761: cover
+# O0762: top cavity
+# O0763: junction
+# O0764: bottom cavity
+# O0765: port holes
+# O0766: vent
+= Tooling =
+# T0002: 15/64 end mill, 4-flute
+# T0009: 1/8 drill
+# T0011: 5/64 end mill, 3-flute
+# T0013: 1/4 end mill, 2-flute
+# T0017: 3/8 end mill, 2-flute
+# T0018: 1/2 end mill, 2-flute
+# T0021: 1 end mill, 2-flute
+# T0022: 3/4 end mill, 2-flute
+# T0024: 3/16 end mill, 3-flute
+= Stock =
+# Top, cover: 2 x 2 x 2.5
+# Bottom: 2 x 2 x 1.9
+= Finished dimensions =
+# Cover: 2 x 2 x 0.5, w/ 0.375 hole
+# Body: 2 x 2 x 3.55
+# Top: 2 x 2 x 1.9
+# Bottom: 2 x 2 x 1.9
+= Instructions =
+# Reference face: left
+# Run 'cover' on top face of 2.5" tall blank
+# Separate cover from top using bandsaw
+## Part cover at 0.5"
+## Size top to 1.9"
+# Run 'top cavity' on top face of 'top'
+# Run 'junction' on bottom face of 'top'
+# Run 'bottom cavity' on top face of 'bottom'
+# Run 'port holes' on front face of 'bottom'
+# Assemble 'top' and 'bottom' to form 'body'
+# Run 'vent' on top face of 'body'