Actuator Coupling 4LFV Creation: Difference between revisions
mNo edit summary |
No edit summary |
||
Line 4: | Line 4: | ||
|product=actuator+coupling+4LFV}} | |product=actuator+coupling+4LFV}} | ||
# Cut blanks on table saw to 1.7 inch. [[File:Actuator coupling 4LFV 3d model.png|alt=3d model of a actuator coupling 4LFV.|thumb|3d model of a actuator coupling 4LFV.]] | # Cut blanks on table saw to 1.7 inch. [[File:Actuator coupling 4LFV 3d model.png|alt=3d model of a actuator coupling 4LFV.|thumb|3d model of a actuator coupling 4LFV.]] | ||
# | # This part is milled on the MV35, follow the instructions within the program. | ||
# Use the coupling drill fixture 0.75 (TL-CDF750) in the mill to drill a cross hole. | # Use the coupling drill fixture 0.75 (TL-CDF750) in the mill to drill a cross hole. | ||
# .285 inch from the top face create a .107 inch hole that goes | #* .285 inch from the top face create a .107 inch hole that goes into the center cavity. | ||
# Use 6-32 | # Use a 6-32 tap to thread the hole. | ||
# Insert screw 6-32 x 1/4 SS SS (92311A144) | # Insert screw 6-32 x 1/4 SS SS (92311A144) |
Revision as of 15:18, 28 May 2024
- Cut blanks on table saw to 1.7 inch.
- This part is milled on the MV35, follow the instructions within the program.
- Use the coupling drill fixture 0.75 (TL-CDF750) in the mill to drill a cross hole.
- .285 inch from the top face create a .107 inch hole that goes into the center cavity.
- Use a 6-32 tap to thread the hole.
- Insert screw 6-32 x 1/4 SS SS (92311A144)