IP Cooler 60mm 3X Creation

From Aeon HACS Wiki
    3D Model    About this item    Product info
  1. Take the 60 mm x 3 IP duct and place the 4-40 nuts in slots for the nuts.
    A 3D drawing of a 60 millimeter IP cooler with a fan on the bottom and three exhausts on top.
    A 3D model of a 60 millimeter IP cooler.
  2. Place the duct on top of the 60 mm fan mount.
  3. Place the fan 60 x 25 mm 5V under the fan mount with one arrow pointing up and the other pointing to the left.
  4. Use (4) screw 4-40 x 1-3/8 PH SS to secure the fan, fan mount, and duct.
  5. The wires coming out of the fan will be in the top right corner of the fan.
Retrieved from "https://aeonhacs.com/wiki/index.php?title=IP_Cooler_60mm_3X_Creation&oldid=675"