Jump to content
Furnace Carriage Kit Creation
- Insert all t-nuts on the 8020 stock that are needed for furnaces.
- Slide in a 10-32 offset SS t-nut, two per 8020 bar, on each end.
- Using a flat surface, attach the carriage end plate to both sides of the 8020 stock with the tabbed side on the same side as the offset t-nuts.
- Screw the carriage end plates in and confirm that the assembly is flat and the 8020 bars are not rotated in place.
- Assemble the 8020 sliding lock onto to carriage end plate.