Carriage end plate

From Aeon HACS Wiki
Revision as of 16:50, 4 June 2024 by 73.24.216.92 (talk) (Created page with "# Use a large size endmill to shorten the length of the folded tabs from 0.150 in to 0.125 in. Use the auto-feed and run the machine at very slow speed, cutting one tab at a time. # Remove any burrs and use the grinding wheel to soften the edges. # Ensure that the tabs do not touch the frame when the sliding lock is tightened.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Use a large size endmill to shorten the length of the folded tabs from 0.150 in to 0.125 in. Use the auto-feed and run the machine at very slow speed, cutting one tab at a time.
  2. Remove any burrs and use the grinding wheel to soften the edges.
  3. Ensure that the tabs do not touch the frame when the sliding lock is tightened.
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Carriage_end_plate&oldid=968"