Jump to content

LN Tubing Retainer 11 Port Creation

From Aeon HACS Wiki
Revision as of 16:24, 25 February 2024 by Anna.b (talk | contribs) (updated nav bar to template)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
    3D Model    About this item    Product info

  1. Use the paper cutter to cut a piece of PETG that is 2.5 inch by 11.25 inch.
  2. Use the tubing retainer fixture to hold the retainer in the MV35.
  3. Follow the LN tubing retainer program to put holes in the retainer.