Servo Bottom Serial Creation

From Aeon HACS Wiki
Revision as of 14:28, 25 July 2024 by Gilchrist.gbele (talk | contribs) (Created page with " # Insert the servo bottom block (TL-SBB) into the cover. # Use the cnc mill to mill the servo bottom # Use the program named "rs232 servo bottom" # Mark pin 1: # Mill a .04 OD x 0.015 deep, 0.125" to the side of pin 1, aligned vertically with the row of pin centers. # Trim the ridges of the cover to provide clearance for the DSMC PCB along the sides and on the end beside the connector cutout")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Insert the servo bottom block (TL-SBB) into the cover.
  2. Use the cnc mill to mill the servo bottom
  3. Use the program named "rs232 servo bottom"
  4. Mark pin 1:
  5. Mill a .04 OD x 0.015 deep, 0.125" to the side of pin 1, aligned vertically with the row of pin centers.
  6. Trim the ridges of the cover to provide clearance for the DSMC PCB along the sides and on the end beside the connector cutout
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Servo_Bottom_Serial_Creation&oldid=1938"