Actuator Frame Bearing 4BSV Creation

From Aeon HACS Wiki
Revision as of 10:50, 25 July 2024 by Oscar (talk | contribs)
    3D Model    About this item    Product info

Instructions

diagram of the bearing with the sizes of the holes
Measurement guide for drilling bearing
piece of plastic machined with a screw inside
Actuator frame bearing 4BSV exploded
  1. This part is milled in the MV35, follow the instructions within the program.
  2. Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
  3. Tap the hole with a 6-32 bit.
  4. Insert a screw 6-32 x 1/4 SS SS.