Actuator Coupling 4BSV Creation

    3D Model    About this item    Product info

---

Instructions

Actuator coupling 4BSV exploded

1. Cut Acetal Black Rod 1 on table saw to 1.7 inch.
2. This part is milled in the MV35, follow the instructions within the program.
3. Use the coupling drill fixture 1.00 in the mill to drill a cross hole.

   0.215 inch from the top face create a 0.266 inch hole that goes all the way to the center cavity.

   0.215 inch from the top face create a 0.332 inch hole that is 0.2 inch deep.

4. Use the threaded insert 6-32 driver and turn the mill shaft by hand to drive the threaded insert 6-32 into the hole.
5. Insert screw 6-32 x 1/4 SS SS.
6. Insert screw 6-32 x 1/8 SS SS.