3D printing, filament

From Aeon HACS Wiki
Revision as of 15:49, 17 July 2024 by Gilchrist.gbele (talk | contribs) (Created page with "=Changing the filament= # select unload filament # select the material currently loaded # wait for the printer to heat up # press the knob then pull the filament out # if switching to a different material then press x after this ## after selecting autoload select the material that is going to be loaded # auto load # load the new filament # make sure the color is correct # (if the type of filament is changed then there settings on the super slicer need to be changed)")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Changing the filament

  1. select unload filament
  2. select the material currently loaded
  3. wait for the printer to heat up
  4. press the knob then pull the filament out
  5. if switching to a different material then press x after this
    1. after selecting autoload select the material that is going to be loaded
  6. auto load
  7. load the new filament
  8. make sure the color is correct
  9. (if the type of filament is changed then there settings on the super slicer need to be changed)
Retrieved from "https://aeonhacs.com/wiki/index.php?title=3D_printing,_filament&oldid=1635"