Actuator Frame Bearing 4BSV Creation

From Aeon HACS Wiki
Revision as of 11:11, 17 July 2024 by Oscar (talk | contribs)
    3D Model    About this item    Product info
diagram of the bearing with the sizes of the holes
Actuator frame bearing 4BSV (creation)

Instructions

bearing with two holes on top and on the side
Actuator frame bearing (Vertical hole size: 0.107")(side hole size: 6-32)
piece of plastic machined with a screw inside
Actuator frame bearing 4BSV exploded
  1. This part is milled in the MV35, follow the instructions within the program.
  2. Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
  3. Tap the hole with a 6-32 bit.
  4. Insert a screw 6-32 x 1/4 SS SS.
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Actuator_Frame_Bearing_4BSV_Creation&oldid=1591"