Actuator Frame Bearing 4BSV Creation

    3D Model    About this item    Product info

---

1. 

   Actuator frame bearing 4BSV exploded

   bearing with two holes on top and on the side

   Actuator frame bearing 4BSV (creation)

   This part is milled in the MV35, follow the instructions within the program.
2. Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
3. Tap the hole with a 6-32 bit.
4. Insert a screw 6-32 x 1/4 SS SS.