Actuator Coupling 4LFV Creation

    3D Model    About this item    Product info

---

Actuator coupling 4LFV exploded

Instructions

3d model of a actuator coupling 4LFV.

1. Cut blanks on table saw to 1.7 inch.
2. This part is milled on the MV35, follow the instructions within the program.
3. Use the coupling drill fixture 0.75 (TL-CDF750) in the mill to drill a cross hole.
   • .285 inch from the top face create a .107 inch hole that goes into the center cavity.
4. Use a 6-32 tap to thread the hole.
5. Insert screw 6-32 x 1/4 SS SS (92311A144)