Jump to content

LN Tubing Retainer 11 Port Creation

From Aeon HACS Wiki

Revision as of 10:21, 17 February 2024 by Anna.b (talk | contribs) (added about this item link to nav bar)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

3D Model About this item Product info

Use the paper cutter to cut a piece of PETG that is 2.5 inch by 11.25 inch.
Use the tubing retainer fixture to hold the retainer in the MV35.
Follow the LN tubing retainer program to put holes in the retainer.

Retrieved from "https://aeonhacs.com/wiki/index.php?title=LN_Tubing_Retainer_11_Port_Creation&oldid=385"