Actuator Frame Bearing 4BSV Creation: Difference between revisions
No edit summary |
No edit summary |
||
Line 8: | Line 8: | ||
[[File:Actuator frame bearing 4BSV exploded.png|alt=piece of plastic machined with a screw inside|thumb|Actuator frame bearing 4BSV exploded]] | [[File:Actuator frame bearing 4BSV exploded.png|alt=piece of plastic machined with a screw inside|thumb|Actuator frame bearing 4BSV exploded]] | ||
# This part is milled in the MV35, follow the instructions within the program. | # This part is milled in the MV35, follow the instructions within the program. | ||
#: Drill a 0.652" hole on the top of the bearing. | |||
# Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position. | # Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position. | ||
# Tap the hole with a 6-32 bit. | # Tap the hole with a 6-32 bit. | ||
# Insert a screw 6-32 x 1/4 SS SS. | # Insert a screw 6-32 x 1/4 SS SS. |
Revision as of 13:03, 25 July 2024
Instructions
- This part is milled in the MV35, follow the instructions within the program.
- Drill a 0.652" hole on the top of the bearing.
- Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
- Tap the hole with a 6-32 bit.
- Insert a screw 6-32 x 1/4 SS SS.