Actuator Coupling 6PV Creation: Difference between revisions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|about=Actuator_Coupling_6PV | |about=Actuator_Coupling_6PV | ||
|product=actuator+coupling+6PV}} | |product=actuator+coupling+6PV}} | ||
== Instruccions == | == Instruccions == | ||
Latest revision as of 16:03, 24 July 2024
Instruccions
.png)
- Cut Acetal Black Rod 1 on table saw to 1.7 inch.
- This part is milled on the MV35, follow the instructions within the program.
- Use the coupling drill fixture 1.00 in the mill to make a cross hole.
- 0.285 inch from the top face create a 0.157 inch hole that goes all the way through the coupling.