Actuator Frame Bearing 4BSV Creation: Difference between revisions
No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
|about=Actuator_Frame_Bearing_4BSV | |about=Actuator_Frame_Bearing_4BSV | ||
|product=actuator+frame+bearing+4BSV}} | |product=actuator+frame+bearing+4BSV}} | ||
== Instructions == | |||
[[File:Actuator frame bearing 4BSV (creation).png|alt=bearing with two holes on top and on the side|thumb|Actuator frame bearing (Vertical hole size: 0.107")(side hole size: 6-32)]] | |||
[[File:Actuator frame bearing 4BSV exploded.png|alt=piece of plastic machined with a screw inside|thumb|Actuator frame bearing 4BSV exploded]] | |||
# This part is milled in the MV35, follow the instructions within the program. | |||
# Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position. | # Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position. | ||
# Tap the hole with a 6-32 bit. | # Tap the hole with a 6-32 bit. | ||
# Insert a screw 6-32 x 1/4 SS SS. | # Insert a screw 6-32 x 1/4 SS SS. |
Revision as of 10:15, 17 July 2024
Instructions
- This part is milled in the MV35, follow the instructions within the program.
- Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
- Tap the hole with a 6-32 bit.
- Insert a screw 6-32 x 1/4 SS SS.