Actuator Frame Bearing 4BSV Creation: Difference between revisions

From Aeon HACS Wiki
VisualWikitext
No edit summary
No edit summary
Line 3: Line 3:
|about=Actuator_Frame_Bearing_4BSV
|about=Actuator_Frame_Bearing_4BSV
|product=actuator+frame+bearing+4BSV}}
|product=actuator+frame+bearing+4BSV}}
# [[File:Actuator frame bearing 4BSV exploded.png|alt=piece of plastic machined with a screw inside|thumb|Actuator frame bearing 4BSV exploded]]This part is milled in the MV35, follow the instructions within the program.
# [[File:Actuator frame bearing 4BSV exploded.png|alt=piece of plastic machined with a screw inside|thumb|Actuator frame bearing 4BSV exploded]][[File:Actuator frame bearing 4BSV (creation).png|alt=bearing with two holes on top and on the side|thumb|Actuator frame bearing 4BSV (creation)]]This part is milled in the MV35, follow the instructions within the program.
# Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
# Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
# Tap the hole with a 6-32 bit.
# Tap the hole with a 6-32 bit.
# Insert a screw 6-32 x 1/4 SS SS.
# Insert a screw 6-32 x 1/4 SS SS.

Revision as of 10:11, 17 July 2024

    3D Model    About this item    Product info
  1. piece of plastic machined with a screw inside
    Actuator frame bearing 4BSV exploded
    bearing with two holes on top and on the side
    Actuator frame bearing 4BSV (creation)
    This part is milled in the MV35, follow the instructions within the program.
  2. Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
  3. Tap the hole with a 6-32 bit.
  4. Insert a screw 6-32 x 1/4 SS SS.
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Actuator_Frame_Bearing_4BSV_Creation&oldid=1588"