Actuator Frame Bearing 4BSV Creation: Difference between revisions

From Aeon HACS Wiki
VisualWikitext
No edit summary
No edit summary
Line 3: Line 3:
|about=Actuator_Frame_Bearing_4BSV
|about=Actuator_Frame_Bearing_4BSV
|product=actuator+frame+bearing+4BSV}}
|product=actuator+frame+bearing+4BSV}}
# This part is milled in the MV35, follow the instructions within the program.
# [[File:Actuator frame bearing 4BSV exploded.png|alt=piece of plastic machined with a screw inside|thumb|Actuator frame bearing 4BSV exploded]]This part is milled in the MV35, follow the instructions within the program.
# Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
# Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
# Tap the hole with a 6-32 bit.
# Tap the hole with a 6-32 bit.
# Insert a screw 6-32 x 1/4 SS SS.
# Insert a screw 6-32 x 1/4 SS SS.

Revision as of 16:38, 16 July 2024

    3D Model    About this item    Product info
  1. piece of plastic machined with a screw inside
    Actuator frame bearing 4BSV exploded
    This part is milled in the MV35, follow the instructions within the program.
  2. Use the mill to drill a 0.107 inch hole through the center of one side. Follow the model to find the correct position.
  3. Tap the hole with a 6-32 bit.
  4. Insert a screw 6-32 x 1/4 SS SS.
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Actuator_Frame_Bearing_4BSV_Creation&oldid=1584"