Actuator LN Valve Creation: Difference between revisions
(canceled uploading image) |
(added about this item link to nav bar) |
||
Line 1: | Line 1: | ||
<div style="text-align: right;">[https://cad.onshape.com/documents/a2590672ece11180cd4d60d0/w/180034e6f61eac6669ee5961/e/94905bfcc81be7dcf257d095?configuration=default&renderMode=0&uiState=65be8490a5f64c01ea3b909e 3D Model] [ | <div style="text-align: right;">[https://cad.onshape.com/documents/a2590672ece11180cd4d60d0/w/180034e6f61eac6669ee5961/e/94905bfcc81be7dcf257d095?configuration=default&renderMode=0&uiState=65be8490a5f64c01ea3b909e 3D Model] [https://aeonhacs.com/wiki/index.php?title=Actuator_LN_Valve About this item] [https://www.aeonlaboratories.com/?page=products&item=actuator+LN+valve Product info]</div> | ||
---- | ---- | ||
# Open the serial port terminal. | # Open the serial port terminal. |
Revision as of 13:13, 3 February 2024
- Open the serial port terminal.
- Plug the test actuator controller into a computer.
- Plug the CPW servo into the controller.
- Command g1000.
- Disconnect the servo.
- Install an LN valve stem onto the servo drive spline with the orientation mark facing the servo label.
- Install an LN valve stem collar, chamfered ID first.
- Press the collar down into contact with the servo gear cover using the collar pusher (TL-LNVSCP).
- NOTE: Do not assemble screws and servo t-nut onto valve yet, will be assembled when making LN manifold assembly.