Actuator Coupling 4LFV Creation: Difference between revisions
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
== Instructions == | == Instructions == | ||
[[File:Actuator coupling 4LFV exploded.png|alt=black cylinder with screw exploded|thumb|Actuator coupling 4LFV exploded]] | [[File:Actuator coupling 4LFV exploded.png|alt=black cylinder with screw exploded|thumb|Actuator coupling 4LFV exploded]] | ||
# Cut | # Cut Acetal Black Rod 750 on table saw to 1.7 inch. | ||
# This part is milled on the MV35, follow the instructions within the program. | # This part is milled on the MV35, follow the instructions within the program. | ||
# Use the coupling drill fixture 0.75 | # Use the coupling drill fixture 0.75 in the mill to drill a cross hole. | ||
# | #: 0.285 inch from the top face create a 0.107 inch hole that goes into the center cavity. | ||
# Use a 6-32 tap to thread the hole. | # Use a 6-32 tap to thread the hole. | ||
# Insert screw 6-32 x 1/4 SS SS | # Insert screw 6-32 x 1/4 SS SS. |
Latest revision as of 14:45, 24 July 2024
Instructions
- Cut Acetal Black Rod 750 on table saw to 1.7 inch.
- This part is milled on the MV35, follow the instructions within the program.
- Use the coupling drill fixture 0.75 in the mill to drill a cross hole.
- 0.285 inch from the top face create a 0.107 inch hole that goes into the center cavity.
- Use a 6-32 tap to thread the hole.
- Insert screw 6-32 x 1/4 SS SS.