Actuator Coupling 4LFV Creation: Difference between revisions

VisualWikitext

Latest revision as of 14:45, 24 July 2024

3D Model About this item Product info

Instructions

Cut Acetal Black Rod 750 on table saw to 1.7 inch.
This part is milled on the MV35, follow the instructions within the program.
Use the coupling drill fixture 0.75 in the mill to drill a cross hole.
0.285 inch from the top face create a 0.107 inch hole that goes into the center cavity.
Use a 6-32 tap to thread the hole.
Insert screw 6-32 x 1/4 SS SS.

@@ Line 1: / Line 1: @@
-<div style="text-align: right;">[https://cad.onshape.com/documents/a2590672ece11180cd4d60d0/w/180034e6f61eac6669ee5961/e/f8024e3238c01a36d461e9b2?configuration=List_DTwLl7wsXTKpkn%3D_4LFV&renderMode=0&uiState=65ba8dd4dd682e566155eeda 3D Model]&nbsp;&nbsp;&nbsp;&nbsp;[https://aeonhacs.com/wiki/index.php?title=Actuator_Coupling_4LFV About this item]&nbsp;&nbsp;&nbsp;&nbsp;[https://www.aeonlaboratories.com/?page=products&item=actuator+coupling+4LFV Product info]</div>
+{{Item navbar
-----
+|model=https://cad.onshape.com/documents/a2590672ece11180cd4d60d0/w/180034e6f61eac6669ee5961/e/f8024e3238c01a36d461e9b2?configuration=List_DTwLl7wsXTKpkn%3D_4LFV&renderMode=0&uiState=65ba8dd4dd682e566155eeda
-# Cut blanks on table saw to 1.7 inch.
+|about=Actuator_Coupling_4LFV
-# Follow the steps inside of the coupling instructions. <br><br>
+|product=actuator+coupling+4LFV}}
-# Use the coupling drill fixture 0.75 (TL-CDF750) in the mill to drill a cross hole.
-# .285 inch from the top face create a .107 inch hole that goes all the way to the center of the previous hole.
+== Instructions ==
-# Use 6-32 x 1<nowiki>/</nowiki>4 tap to thread the hole.
+[[File:Actuator coupling 4LFV exploded.png|alt=black cylinder with screw exploded|thumb|Actuator coupling 4LFV exploded]]
-# Insert screw 6-32 x 1/4 SS SS (92311A144)
+# Cut Acetal Black Rod 750 on table saw to 1.7 inch.
+# This part is milled on the MV35, follow the instructions within the program.
+# Use the coupling drill fixture 0.75 in the mill to drill a cross hole.
+#: 0.285 inch from the top face create a 0.107 inch hole that goes into the center cavity.
+# Use a 6-32 tap to thread the hole.
+# Insert screw 6-32 x 1/4 SS SS.