Actuator Frame Bearing 4MFV Creation

From Aeon HACS Wiki
Revision as of 15:23, 25 July 2024 by Oscar (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
    3D Model    About this item    Product info

Instructions

Actuator frame bearing 4MFV exploded
Actuator frame bearing 4MFV
  1. This part is milled in the MV35, follow the instructions within the program.
  2. Drill a 0.567" inch hole on the top of the bearing.
  3. Drill a 0.935" inch hole on the top (Do not go all the way through).

Notes:

  • Follow the model to find the correct position.
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Actuator_Frame_Bearing_4MFV_Creation&oldid=1949"