Actuator Frame Bearing 4BSV Creation
![Actuator frame bearing 4BSV (creation)2](/wiki/thumb.php?f=Actuator_frame_bearing_4BSV_%28creation%292.png&width=300)
Instructions
![piece of plastic machined with a screw inside](/wiki/thumb.php?f=Actuator_frame_bearing_4BSV_exploded.png&width=300)
- This part is milled in the MV35, follow the instructions within the program.
- Drill a 0.652 inch hole on the top of the bearing.
- Drill a 0.107 inch hole through the center of one side.
- Tap the hole with a 6-32 bit.
- Insert a screw 6-32 x 1/4 SS SS.
Notes:
- Follow the model to find the correct position.