Servo Bottom Serial Creation: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

25 July 2024

  • curprev 14:2814:28, 25 July 2024‎ Gilchrist.gbele talk contribs‎ 395 bytes +395‎ Created page with " # Insert the servo bottom block (TL-SBB) into the cover. # Use the cnc mill to mill the servo bottom # Use the program named "rs232 servo bottom" # Mark pin 1: # Mill a .04 OD x 0.015 deep, 0.125" to the side of pin 1, aligned vertically with the row of pin centers. # Trim the ridges of the cover to provide clearance for the DSMC PCB along the sides and on the end beside the connector cutout"
Retrieved from "https://aeonhacs.com/wiki/index.php?title=Servo_Bottom_Serial_Creation"